Fixture Housing - Heavy cast low copper aluminum assembly (A356 alloy, <0.2% copper – AERM; A360 alloy, <0.4% copper – AER and AER-G) with integral cooling ribs above the electrical compartment. Minimum wall thickness is .188". Housing attaches to pole via a one piece, extruded aluminum arm with centering guides for internal draw bolts and a gasketed wiring access door. Housing/pole junction is gasketed. All exposed hardware is stainless steel. Internal protected hardware is electro-zinc plated.
Lens Frame - One piece cast aluminum lens frame (A356 alloy; <0.2% copper – AERM; A360 alloy, <0.4% copper – AER and AER-G) with integral stainless steel hinge. Tool-less twist to release latch provides positive locking and sealing of the optical chamber by a one piece silicone gasket with ends fused to form a continuous loop. Clear 3/16" thick tempered glass lens retained by stainless steel clips and sealed with self-leveling silicone bonding and sealing adhesive.
HID Electrical Module - All electrical components are UL and cUL recognized mounted on a single plate and factory prewired with quick-disconnect plugs. Electrical module attaches to housing with no-tool hinges and latches, accessible by opening the lens frame. Electronic MH ballasts have power factor of >.95 (70W – 150W) -20°F starting, 120-277V; or >.90 (250W – 400W), -20°F starting, 200-277V, 50Hz/60Hz and have lamp End-of-life protection. 347V option utilizes a step down transformer to the electronic ballast. Special for Philips MasterColor CDM Elite: Electronic MH ballast has a power factor of >.90 (210W & 315W), -4°F starting, 200 - 277V, 50Hz/60Hz and has lamp End-of-life protection. All higher wattage (315W – 400W) electronic MH ballasts have 0 – 10V dimming capability. Magnetic MH ballasts are high power factor (70W – 150W, 575W) or CWA (250W - 1000W, excluding 575W), -20°F starting, multi-tap 120-277V or 480V, 60Hz. All HPS ballasts are core and coil, high-reactance, high power factor (70W – 150W) or CWA (200W – 1000W), -40°F starting.
VLED Driver – Driver is UL and cUL recognized mounted on a
single plate and factory prewired with quick-disconnect
plugs. Constant current driver is electronic and has a
power factor of >.90 and a minimum operating
temperature of -40°F. Drivers accept an input of
120-277V, 50/60Hz. Consult factory for dimming applications.
Finish - Electrostatically applied TGIC Polyester Powder
Coat on substrate prepared with 20 PSI power wash at
140°F. Four step sand blast and iron phosphate
pretreatment for protection and paint adhesion. 400°F
bake for maximum hardness and durability. Texture finish is standard.